Belt Tension Gauge 4748

Features
and Benefits:

• This easy to use and read
  tool allows for accurate belt tension to be set after belt replacement,
  adjustment, or wheel service
• Use on secondary drive belts
  with a 10 lb. spec.

Instructions:

1. Position the small O-ring
   over the 10 lb. mark.
2. Position the U-shaped belt
   cradle against the bottom of the belt at a 90 degree angle and locate
   the large O-ring to a reference point, record reading.
3. Push upward on the rubber
   bumper until the small O-ring touches the bottom of the tool body.
   Re-align the large O-ring to the reference point, difference in the
   reading is the belt deflection (refer to service manual for spec.).

1 yr warranty on material and workmanship

OTC
4748

Belt Tension Gauge